MANUFACTURER OF

Carbon thrust pad & axial bearings , carbon brushes
Carbon Gland Rings, Carbon Vanes, Steam Joints,
Carbon -Graphite Bearing ,  Sealing  Rings  - INDIA .
Assam Carbon Products Ltd. India. - Indian Manufacturers of Quality carbon compenents.


-------- WELCOME --------



 

Assam Carbon Products limited , Part of One billion Pound, Morgan Plc, UK has established its brand as quality manufacturer/supplier of Carbon & Graphite Components for almost all tribological  application. It has distinct itself from moulded carbon and resin bonded carbon manufacturer who uses cheap raw material and outdated technology. ACPL uses Morgan approved sources and import raw material. ACPL has carbon manufacturing plant in Guwahati and finished parts machining unit at Hyderabad.
    Our range include Axial bushes & thrust pad assembly for submersible pump , Morganite grade carbon brushes , Pantograph, SIG Contact & finished Carbon Seals for mechanical seals. Various other products like Vane, Gland Ring, Steam Joints, Bush Bearings etc. in resin and metal impregnated grades of Carbon & Graphite
     Performance of Submersible Pumps is Mainly depends on thrust pad assembly and axial bushes. A careful selection of materials of construction of contact surface reduces starting current and improves efficiency of Motor. Worldwide carbon is best suited material for thrust pad and axial bushes. Carbon's tribological properties make it best alternative over other materials like ferro asbestos, polyamide, PTFE ,  
 

 

 

 

 

 

 

 
Carbon Sealing Rings for PumpsSteam Joints for Paper and Other Industries
Carbon & Graphite BearingCarbon Thrust Pads & Axial Bearings
Carbon VanesCarbon Gland Rings


 

 

, LTB etc. Efficiency of the pumps improves by 5 to 7% which qualifies a submersible pump manufacturer to go for IS standard. IS 8034 & IS 9283 demands for more than 60% efficiency.
   Our CY10C resin impregnated grade is worldwide accepted grade for thrust pad. Antimony impregnated MY10K, MY3D/MY10D copper lead impregnated are also used for high HP rated motor. All Carbon Grade retain the basic properties thus making them as unique engineering material & suited for thrust pad & axial bearing which may operate in conditions beyond the limit of other materials. Our Carbon withstand unpredictable load, help the pumps to run in dry condition, Motor does not seize even after prolonged rest, generate low heat etc. These grades are manufactured only at  Assam Carbon Products Ltd India  and exclusively marketed by ACPL only.

    ---  :  Products  :  ---

            Carbon Thrust Pads and Axial Bearings
             Carbon Gland Rings
             Carbon vanes
             Steam Joints
             Carbon & Graphite bearings
             Sealing Rings
 



          :   Works  :
          
          

ASSAM
Birkuchi, Guwahati - 780026. India
Ph: (0361)  640262 / 741 / 630
Fax : 0361 - 640368
Email : ascarbon@gw1.vsnl.net.in

HYDERABAD
2,Industrial Area, Phase 1, Patancheru - 502319
District Medak ( Andhra Pradesh ) India
Ph: (08455) 42091 , 42089 , 42239
Fax : 08455 - 42237
Email : acplpat@hd1.vsnl.net.in

MUMBAI
H-29, MIDC Industrial Area, Taloja, Dist. Raigad, Maharashtra India.
Ph: (022) 7412493
 


         
        
 
{

     :  Zonal Offices  :
 

Calcutta
Everest House, 8th floor, 46/c, Chowinghee Road,
Calcutta -700071
Ph: (033) 2887651/52
Fax : 033 - 2882257
Email : acplc@giascl01.vsnl.net.in

New Delhi
407, Meghdoot, 94, Nehru Place,
Delhi - 110019. India
Ph: (011) 6431622 , Fax : 011 - 6224011
Email : meclacpl@satyam.net.in

MUMBAI
Chateau-De-Mels, West Row House, Plot no.265 St. Anthony's road, Chembur , Mumbai - 400071
Phone : (022) 5512302
Fax : 022 - 5512303
Email : acplmum@vsnl.com

: Member Site On :
 www.pumpsourceindia.com (Indian Pump Manufacturers Directory)
Submersible Pump Parts manufacturers India


 


 

}